BRAKE LINE SET, Complete, stainless steel, includes front set, intermediate and rear axle lines, By Classic Tube, All required flared fitting ends are SAE grade double flared, Lines are CNC bent in stainless steel for improved durability and show, Tubing is US-made SAE J526 spec, Concours approved,
NPD Part Number : 2265-214S Manufacturer Reference #'s: Classic Tube CO1011-SC,
1968-1969 COUGAR DISC, POWER BRAKES, 9 INCH REAR AXLE, W/O STAGGERD SHOCKS
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Very nice stainless lines. Bends are spot on. Despite the Classic Tube's note in the box, the lines are not marked where they radius bend for packing. Their customer service was somewhat short with me acting like I was an idiot if I couldn't figure out what was a radius bend or not. FYI, some radius bends are right up against a necessary bend. Be careful with unbending and compare to existing lines before cutting or removing those. Also, all lines were possible to install on the car assembled, however front passenger required me to bend line to get it around the upper control arm, and also was tough to get under steering column.. The best way to do this line would be to remove the upper control arm and steering column.
Submitted on March 05, 2021 by Brent C.
YES I would recommend this product.
Quality
Value
In Stock!
