SPATTER PAINT, Trunk Compartment, Aqua / Black, quart, use with large nozzle primer spray gun
Note:
MUST USE WITH LARGE NOZZLE PRIMER PRESSURE POT SPRAY GUN. Suction fed guns do not blend the paint properly producing a horrible result.
Product Instructions and Additional Info:
C-8800-2Q Application Instructions0-0 ** WE RECOMMEND THE USE OF A SELF ETCHING PRIMER (NPD P/N
0-0 AP-PSE) ON BARE METAL FIRST BEFORE USING SPATTER PAINT **
0-0 ** MOSTLY USED ON '67-LATER MODELS BUT CAN USE ON BELOW **
1967-1981 CAMARO
1964-1983 CHEVELLE CHEVELLE AND MALIBU
1967-1981 FIREBIRD
1962-1979 NOVA
1964-1981 TEMPEST GTO, LEMANS AND TEMPEST
1964-1988 CUTLASS
1964-1972 SKYLARK
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
I used this on a repair area and it blended and matched the original coating perfectly! Sprayed using a 1.9 tip.
Submitted on April 27, 2021 by Jens K.
YES I would recommend this product.
Quality
Value
Good product, matched the factory color, pattern and texture perfectly.
Submitted on June 03, 2021 by Jens K.
YES I would recommend this product.
Quality
Value
Worked excellent. Far beyond my expectations.
Submitted on October 14, 2021 by Dennis Z.
Quality
Value
I tried using spray can spatter paint at first. What a waste of time and money. I just followed the instructions and used my primer spray gun ( 1.8 tip ). It sprayed on easy and looks great! Recommended Product.
Submitted on November 03, 2021 by Erich C.
YES I would recommend this product.
Quality
Value
follow the instructions and this spatter paint goes on well and looks correct. Watch your coverage so that you don't have any areas not covered enough. I know it says that you don't need a clear top coat but for durability, I top coat with a matte clear 2K in a rattle can (2K clear has an internal chamber with the hardener in it that you break and mix with the clear) Once dry, the clear is very hard
Submitted on March 31, 2022 by Eric M.
YES I would recommend this product.
Quality
Value
Submitted on March 15, 2023 by Steve T.
YES I would recommend this product.
Quality
Value
Its Pretty!!!!
Submitted on January 20, 2024 by Evelyn S.
YES I would recommend this product.
Quality
Value
if you need the darker version of trunk paint, this product looks great and it won't show dirt like the lighter version will
Submitted on January 22, 2024 by Eric M.
YES I would recommend this product.
Quality
Value
I just finished painting a 1970 Chevy Monte Carlo Trunk and inner Fender wells. I primed metal with a 2 part epox primer from Eastwood for a solid base. It took 2 qts to complete the job. I used a Harbor Freight 2 qt paint pot for $50.00 and set at 20 psi. No thinning required just stir and paint. Looks great
Submitted on April 03, 2024 by Steve R.
YES I would recommend this product.
Quality
Value
In Stock!